Simple CPU info utility 2.22 (C) 2001-2021 by Martin Rehak; rayer@seznam.cz
Compiled by GCC 4.8.5 at 08:50:40, Jan 27 2021
(DOS/Win9x compatability)
CPUID supported (opcode 0FA2h), 11 levels, 9 extended levels
CPUID level  0: EAX = 0000000A, EBX = 756E6547, ECX = 6C65746E, EDX = 49656E69
CPUID level  1: EAX = 00010677, EBX = 00040800, ECX = 0008E3FD, EDX = BFEBFBFF
CPUID level  2: EAX = 05B0B101, EBX = 005657F0, ECX = 00000000, EDX = 2CB4304E
CPUID level  3: EAX = 00000000, EBX = 00000000, ECX = 00000000, EDX = 00000000
CPUID level  4: EAX = 0C000121, EBX = 01C0003F, ECX = 0000003F, EDX = 00000001
CPUID level  5: EAX = 00000040, EBX = 00000040, ECX = 00000003, EDX = 00000020
CPUID level  6: EAX = 00000001, EBX = 00000002, ECX = 00000001, EDX = 00000000
CPUID level  7: EAX = 00000000, EBX = 00000000, ECX = 00000000, EDX = 00000000
CPUID level  8: EAX = 00000400, EBX = 00000000, ECX = 00000000, EDX = 00000000
CPUID level  9: EAX = 00000000, EBX = 00000000, ECX = 00000000, EDX = 00000000
CPUID level 10: EAX = 07280202, EBX = 00000000, ECX = 00000000, EDX = 00000503
CPUID xlevel 0: EAX = 80000008, EBX = 00000000, ECX = 00000000, EDX = 00000000
CPUID xlevel 1: EAX = 00000000, EBX = 00000000, ECX = 00000001, EDX = 20100000
CPUID xlevel 2: EAX = 65746E49, EBX = 2952286C, ECX = 726F4320, EDX = 4D542865
CPUID xlevel 3: EAX = 51203229, EBX = 20646175, ECX = 55504320, EDX = 51202020
CPUID xlevel 4: EAX = 30353539, EBX = 20402020, ECX = 33382E32, EDX = 007A4847
CPUID xlevel 5: EAX = 00000000, EBX = 00000000, ECX = 00000000, EDX = 00000000
CPUID xlevel 6: EAX = 00000000, EBX = 00000000, ECX = 18008040, EDX = 00000000
CPUID xlevel 7: EAX = 00000000, EBX = 00000000, ECX = 00000000, EDX = 00000000
CPUID xlevel 8: EAX = 00003024, EBX = 00000000, ECX = 00000000, EDX = 00000000

CPU vendor name: GenuineIntel
CPU name: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz
CPU ID: 10677 - type: 0 (primary), family: 6 (P6), model: 7, stepping: 7
CPU cores: 4, nominal speed: 2833MHz = 8.5*333MHz; L1 cache = 64kB, 8-way
TSC measured CPU core speed: 2831MHz = 8.5*333MHz; L2 cache = 6144kB, 24-way
IA64: 0, EM64T: 1, VM Ext.: 1, FPU: 1, FMA: 0
AVX2: 0, AVX: 0, SSE4.2: 0, SSE4.1: 1, SSSE3: 1, SSE3: 1, SSE2: 1, SSE: 1
MMX: 1, AES: 0, V86 Mode Ext.: 1, XD bit: 1, Safer Mode eXt.(SMX): 1, SMEP: 0
Multi-Threading: 1, Enhanced Speed Step: 1, Thermal monitor 2: 1, ACPI: 1
CPU s/n: 0, Auto-TCC: 1, 4MB pages: 1, 1GB pages: 0, Page Attr. Table: 1
Phys./Virtual address width: 36b/48b, PAE-36b: 1, PSE-36b: 1, Page Glob.En: 1
Memory Type Range Registers (MTRR): 1, CFLUSH chsize = 8, CMPXCHG8B/16B: 1/1
CMOV: 1, FXSAVE&FXSTOR: 1, PCLMULDQ: 0, MOVBE: 0, POPCNT: 0, OS/XSAVE: 0/0
Debug Trace Store 32/64: 1/1, Debug Ext.: 1, RDTSC: 1, SYSENTER&SYSEXIT: 1
Machine-Check Except.: 1, Machine-Check Arch. & MCG_CAP reg.: 1, CLFLUSH: 1
MSR: 1, APIC/xAPIC (SMP support): 1/0, APIC ID = 0, APIC ID mask: PPPPPPCC
DTS Tjmax = 100C, core(s): Tj[0] = 53C
EIST: on, IDA: on, Vcore = 1.250V [1.150V - 1.250V], mul = 8.5 [6.0 - 8.5]
DB CPU name: Core 2 Quad/Xeon Yorkfield 2333-3200, LGA 775, 45nm